B5S - BAMBOO MIRROR BOARD (SILVER)

Overview

The B5S Bamboo Mirror Board combines the sleek elegance of a high-gloss mirror finish with the warmth and sustainability of a bamboo-charcoal composite core. In a 2440 × 1220 mm panel at just 5 mm thick, it's a lightweight, affordable way to bring polished reflective detail to walls, furniture, ceilings, and architectural feature pieces.

Finish: high-gloss mirror film in Silver, bonded to the core with imported PUR hot-melt adhesive for a durable, true-mirror surface that holds its colour and sheen.

Why B5S

• Mirror-finish surface. High-gloss reflective film in Silver, PUR hot-melt bonded for a durable finish that resists peeling, fading, and yellowing.
• Bamboo-charcoal composite core. High-density co-extruded board of PVC resin, bamboo charcoal powder, and wood powder — warmer and lighter than metal, and tougher than plain PVC sheet.
• Waterproof & moisture-proof. Safe for bathrooms, splashbacks, and humid spaces where a traditional mirror would fail.
• Class B1 flame retardant. Meets stringent fire safety requirements for commercial fit-outs.
• E0 emission, lead-free. Low-VOC and environmentally friendly — safer for homes, studios, and healthcare environments.
• Bendable & slottable. V-groove the back for clean 90° corners, warm with a heat gun for a soft arc, or slot for full 360° column wrapping.
• Easy to install. Fix with construction adhesive, finish with aluminium trim, or drop into a slotted mounting system.

Where to use it

• Feature walls in living rooms, bedrooms, and entryways
• Ceiling accents, cove reflectors, and backlit soffits
• Furniture highlights, cabinet doors, and decorative trims
• Column wrapping (360°) and curved architectural details
• Retail displays, showrooms, hotel lobbies, and restaurants
• Commercial signage and backlit feature panels

Installation

Three methods, depending on the surface and the finish you're after:

1. Glue. Dab construction adhesive across the back of the panel, press to the wall, and hold until set. Fastest method for flat, clean, sound surfaces.
2. Aluminium trim. Frame the panel in matching or contrasting aluminium profiles for a crisp, finished edge — ideal for feature walls and display backdrops.
3. Slotting. Route V-grooves on the back to fold the panel around corners, columns, or curved features. 90° bends are clean out of the groove; soft arcs come easily with a heat gun; full 360° column wraps are possible with fine-pitched slotting.

Cut with a standard fine-tooth saw or a sharp utility knife. A protective film is applied to the mirror face at the factory — leave it on during cutting and fitting, and peel it off last.

Care & handling

Store panels flat and indoors until installation. Leave the protective film on until the panel is in place, and inspect each panel for film lift, colour variation, or shipping damage before installing — once mounted, claims cannot be accepted. After installation, clean with a soft microfibre cloth and a mild glass cleaner. Avoid abrasive pads, ammonia-based cleaners, and aggressive solvents, which can haze or lift the mirror film.