PU2B - Design Board Typ 2 - WINDOW (BLACK)

Overview

The Window Design Board Type 2 (Black) is a 3D-textured design board with a sculpted Window pattern in Black. Manufactured from a durable PVC / PU composite, each panel delivers the tactile, architectural look of hand-finished stone, pattern, or geometric artwork — without the weight, cost, or installation complexity of the real thing.

Panel size: 1200 × 600 × 25 mm.

Why this board

• Sculpted 3D texture. The surface reads as genuine relief — not a printed picture — so feature walls have real depth under side-lighting.
• Light & rigid. PVC / PU composite — far lighter than stone or concrete, yet dimensionally stable and dent-resistant.
• Waterproof & moisture-proof. Safe for humid spaces, splashbacks, and feature bathrooms.
• Low-VOC, lead-free. Safer for homes, hospitality, and healthcare environments.
• Easy to install. Glue to sound substrates, screw to a batten subframe, or frame with aluminium trim for a crisp finish.
• Cut on-site. Trim with a standard utility knife or fine-tooth saw.

Where to use it

• Feature walls in living rooms, bedrooms, entryways, and home offices
• Reception desks, meeting rooms, and studio walls
• Hotel lobbies, restaurants, retail fit-outs, and showroom backdrops
• Commercial signage and branded backgrounds
• Headboards, stairwell walls, and elevator-lobby features

Installation

1. Sound, flat substrate. Plasterboard, plywood, or a level solid wall works best.
2. Adhesive. Construction adhesive (e.g. "liquid nails") across the back of the panel. Optionally add mechanical fixings in feature panels that will carry hanging items.
3. Butt and align. Pattern-match adjacent panels at the join so the sculpted texture continues cleanly.
4. Finish. Frame with aluminium trim or fill the perimeter joint with colour-matched silicone sealant.

Cut around switches and outlets with a utility knife. A protective film is applied to the face at the factory — leave it on during cutting and fitting, and peel it off last.

Care & handling

Store flat and indoors until installation. Inspect each panel for pattern alignment, colour variation, or shipping damage before installing — once mounted, claims cannot be accepted. After installation, clean with a soft cloth and a mild neutral cleaner. Avoid abrasive pads and aggressive solvents.